DJI RS3 Pro Combo Gimbal Stabilizer

Automated axis locks on the 3 axis (auto lock) Automatically unlock when powering on and lock upon sleep and powering off while unfolding the folding axis arms automatically. (Process only 2 seconds, bringing users substantial convenience) Physical gimbal mode switch button: To allowing users to quickly switch between pre-set shooting modes including PF (pan follow), PTF (pan and tilt follow), FPV (pan, tilt and roll follow). The FPV switch is also customizable to other modes such as 3D Roll360, Portrait, or custom on the touchscreen. extended carbon fiber axis arms: a material with the optimal balance of ultra-light weight and stiffness. It has gone through over ten thousand impact simulations in our reliability lab. To better adapt to professional video cameras, extended the carbon fiber arms in RS 3 Pro, so it can work perfectly with professional camera and lens combinations (Sony FX6 or Canon C70 with a 24-70mm f/2.8 lens.) Extended the upper quick-release plate: This enlarges the contact between the camera base and the quick release plate to increase friction and prevent cameras from falling off in extreme conditions. 1.8-inch OLED full-color touchscreen: Compared with DJI RS 2, the new DJI RS 3 Pro provides 1.8” OLED full-color touchscreen which is 28% larger display compared to RS 2 Applied Bluetooth control when the users need to control the camera, simply connect the camera to DJI RS3 via bluetooth (start and stop recording) Equipped with LiDAR focusing technology of Ronin 4D (sold separately) Users can simply mount the LiDAR Range Finder (RS) to the cold shoe of the camera, which works perfectly with the new focus motor to support autofocus on manual after a quick calibration. As per DJI tests, even T1.4 large aperture manual lenses can achieve accurate focusing. The new LiDAR Range Finder features 43,200 measurement points and a 70-FOV, in addition, up to three sets of lens calibration profiles can be stored